E-85 Dominator Carb

[73 Sanger Flat]

Does any one have a good source for a E-85 Dominator Carb ?. need a 1150 -1250 Dominator set up for E-85 ..Damm these suckers are expensive !!!  Need something to feed 555 cubic inches turning about 7200 RPM and up maybe ???

Quickfuel is out of conversion kits and it will be two to three weeks before they get then off back order ..

Might just have to run some good fuel the first wekend out for test and tuning until I get a E-85 Carb ..

Any body got a contact please let me know ..

 

[Devilman]

May hit up Tom/IMPATIENT1, I thought he is /was into the E-85 deal there for a bit. Have to get him on Perf. Boats though, he don't come on here anymore...

 

[73 Sanger Flat]

Thanks Kenny . I will shoot him a PM over there ..

 

[CHARLIE F]

Give Alan Hood a call. Tell him I suggested you call. He has a first class business and is a great guy. He builds some mean engines.

Let him tell you about some of the carbs he has.

Hood Performance
Address: 1608 Sunset Terrace
City: West Plains
State: Missouri

ZIP: 65775
Phone: (417)255-9950

 

[73 Sanger Flat]

Tom gave me a few name to try but not any cheaper than what i have found . I calleed Bigs Carb and they want 1200.00 and three weeks to custom build one . He does sound like he knows what he is talking about on carbs.. 

The carb will pay for itself in about 7 trips to the river if I burn 20 gallons a weekend .. Then It will save me about 7 dollar a gallon after that .. Damm these boat are expensive to keep going ..

 

[73 Sanger Flat]

Give Alan Hood a call. Tell him I suggested you call. He has a first class business and is a great guy. He builds some mean engines.

Let him tell you about some of the carbs he has.

Hood Performance
Address: 1608 Sunset Terrace
City: West Plains
State: Missouri

ZIP: 65775
Phone: (417)255-9950

Thanks Charlie ,I will give him a call ..

 

[73 Sanger Flat]

Just talked to Alan , very nice guy . He does not do any E-85 carbs. He buys them already converted over or he get the kits from Quick fuel also ..
He said he need to get down to the Plowman event one of these year .. He told me about he boat and engine .. That is a sleeper ...

 

[73 Sanger Flat]

Got a Carb heading this way from BLP .. It a 1050 but will flow 1235 cfm . That should work . It is being built to my engine specs .

Hoping to have it before we go to Steel Creek on the 19th .. They thought I would have it next Thursday ..