Steel Creek ( Whitney Lake ) June 1st and 2nd

[duanehydro]

:smile23: Here we go........... crazy.gif

 

[Knotty Girl]

:smile23: Here we go........... crazy.gif

:smile16:

 

[Disturbed]

Is there enough space to make a couple of passes with the Hydro?

What are you going to do?  Paddle????  crazy.gif

 

[73 Sanger Flat]

if you head out to the main river channel you can .. Not up close to the banks like us slow boats can do .. Let us know , we will make sure we have some recovery boats ready ..

 

[Knotty Girl]

if you head out to the main river channel you can .. Not up close to the banks like us slow boats can do .. Let us know , we will make sure we have some recovery boats ready ..

I cannot drive it to a place.  I have to run close to where I put in.  Not so good on running around.  :smile20:

 

[jimsplace]

Is there enough space to make a couple of passes with the Hydro?

There is for most people and if it's pointed in the right direction.
Yes, there is.

 

[veestyle]

Had a great time in whitney, nice meeting some new folks. thanks for the pointers on LS mounts formulaZR1.

Looking forward to going to whitney again.

 

[Knotty Girl]

Is there enough space to make a couple of passes with the Hydro?

There is for most people and if it's pointed in the right direction.
Yes, there is.

OH that makes a difference.  think.gif

 

[73 Sanger Flat]

we have enough boats to get you out and back , no worries .. Just need to go out about 1/2 mile and make a pass and come back in .. I want to watch .. There are many trees for you to pick on Henry down there ..

 

[Knotty Girl]

we have enough boats to get you out and back , no worries .. Just need to go out about 1/2 mile and make a pass and come back in .. I want to watch .. There are many trees for you to pick on Henry down there ..

Me and trees do not mix  :smile20:

 

[beaverfab]

Henry just flipped your boat over, bottom is done and I will be fitting you new parts this weekend. j.j.

 

[Knotty Girl]

Henry just flipped your boat over, bottom is done and I will be fitting you new parts this weekend. j.j.

Makes me Happy Happy Happy.  jump.gif jump.gif jump.gif

 

[jimsplace]

Henry just flipped your boat over, bottom is done and I will be fitting you new parts this weekend. j.j.

Makes me Happy Happy Happy.  jump.gif jump.gif jump.gif

It sounds like you're getting closer.
What's next and how soon?
  :smile17:

 

[Knotty Girl]

I pick it up next weekend, then off to paint.

 

[HellinnFrnt]

we have enough boats to get you out and back , no worries .. Just need to go out about 1/2 mile and make a pass and come back in .. I want to watch .. There are many trees for you to pick on Henry down there ..

Me and trees do not mix  :smile20:

I don't know... I think you did good all things considered...

 

[FormulaZR]

http://www.youtube.com/watch?v=Dyzxhnh3tu0&feature=youtu.be

Rock on! My boat and belly are now famous!

Had a great time in whitney, nice meeting some new folks. thanks for the pointers on LS mounts formulaZR1.

Looking forward to going to whitney again.

Glad to help. The SW Race Cars ones I have are available here: http://swracecars.com/store/Front-Motor-Plate-OSCARItem_51=20-213.aspx but like I said, only use the water pump bolts for attachment.

There are some newer ones that weren't around when I built my boat that have a couple extra holes and bushings to give a little more support. I've never seen or used them...but the guys on LS1Tech swear by them. Here: http://www.competitionengineering.com/catalog/CategoryDisplay.asp?CatCode=11073 p/n C3995

Also - Madman Fabrication makes some as well that are supposed to be great also.

 

[blazeracer]

Jen's vid is out from the past weekend at the farm.

http://www.youtube.com/watch?v=5vQwzDP19nY

 

[jdeaton]

Great Video Jen, wish I could have been there!

 

[Patchman]

Jen's vid is out from the past weekend at the farm.

http://www.youtube.com/watch?v=5vQwzDP19nY

Cool vid! Looks like a blast! clap.gif