Lake Palestine May 9th and 10th

badblood

New member
Well heres the scoop on the motor... It made 1477hp on the first stage of Nos. On the second pull we sprayed the second stage and it made 1600hp but the fuel rail on the second stage had a bad fuel leak and it smoked at least one piston. So you wont see me for the 10th I will be thrashing to try to get it back together for Memorial weekend. :smile21:
 

badblood

New member
Torque # was 1319 ft lbs on two stages, would have made more if all the fuel had gone in the motor and not on the dyno cell floor. It doesnt take long to wound one with a dry shot of nos.  :smile21:
 

Carnivalride

New member
badblood said:
Well heres the scoop on the motor... It made 1477hp on the first stage of Nos. On the second pull we sprayed the second stage and it made 1600hp but the fuel rail on the second stage had a bad fuel leak and it smoked at least one piston. So you wont see me for the 10th I will be thrashing to try to get it back together for Memorial weekend. :smile21:

Tough break man but awesome numbers, 1400+hp for a lake boat?!?!?!  :smile20:


Good luck on getting it all back together again.
 

badblood

New member
1477hp was with only 1 stage of NOS. It made 1600 with two stages and still has a third stage too.  But as you see there is no margin for error at this level. I will have the motor home sunday afternoon and will tear it down asap to see just how sick it is. If all it needs is a piston or two and no machine work, I will have back together for Memorial day. Maybe I can make the next Palistine run.  :smile21:
 

TAYLOR TIM

New member
i will be up there on saturday morning--my mom lives up on the Chandler side, she says the lake is full of trees, will i have a problem gettng to the rv park from the chandler side? i have never been on this lake
 

badblood

New member
Update on the 632... It hurt 3 pistons on the dyno. I just got parts in last night and started putting the short block back together. I am up to a 4 cylinder now, and I am off today. The leak check found 3 valves leaking so a little machine work is in order too. Sure hope it doesnt need any valves, titanium has gone waaaaaaay up. Looks like it is on track for memorial weekend.
 

CHARLIE F

New member
Looks like I am out this weekend.
With all the bad weather the past couple of weeks i have  not been able to pull my motor and fix my rear main seal.

Now I am going to be pushing  to get everything ready for Memorial Day. 
 

78Kona

New member
pckirkland said:
HEY !!! YALL GONNA FEED ME WHEN I GET THERE SATURDAY OR DO I NEED TO BRING ME A SANDWICH FOR LUNCH ??
Rob and I are cooking up some wild pig and I'll be making some beans. If you want to, bring some tater salad, chip or desert.
As far as boating from Chandler, it would be safer to trailer it down.
Looking forward to meeting you,
Alan
 

Warhawk468

New member
badblood - Are you working on your motor at Mike's?

I'm going down to pop's this Saturday we are going to try to put the Warhawk in Lake Palestine if the weather holds. If it rains we will just drink beer haha.
 

wolfman

New member
Cash Hole said:
pckirkland said:
HEY !!! YALL GONNA FEED ME WHEN I GET THERE SATURDAY OR DO I NEED TO BRING ME A SANDWICH FOR LUNCH ??
Rob and I are cooking up some wild pig and I'll be making some beans. If you want to, bring some tater salad, chip or desert.
As far as boating from Chandler, it would be safer to trailer it down.
Looking forward to meeting you,
Alan
I'm with Alan. Safer to trailer.
 

wolfman

New member
Sorry David looks like no pole on the poon toon.  Always workin on JCs crap at the last minute  :evil:
 

78Kona

New member
taylormanss said:
TAYLOR TIM said:
i will be up there on saturday morning--my mom lives up on the Chandler side, she says the lake is full of trees, will i have a problem gettng to the rv park from the chandler side? i have never been on this lake

are any of you lake palestine guys gonna answer this guy's question?
Sorry I quoted the wrong post. It is safer to trailer and most likely faster.
Alan
 
Top