my 81 youngblood resto!

oldbuck40

Active member
TexasJet said:
Soooo, what does that mean? Are you thinking about making progress on the youngblood. Like maybe some day even get it in the water? Black got his CP running now. It sure would be cool to see you on the water again!
Yep Got some big projects out of the way here at work,so now yes now! gonna get it done!,,,,,,,,,sounds like a broken record dont it! :grin:
 

ChryslerJet

New member
oldbuck40 said:
Geeze! I looked back to page 1 and this little ordeal has taken me 5 yrs. crazy.gif well plus the mini jetboat in the middle of all this... Well the engine to the Youngblood is Leaving this afternoon headed to EO's in Arlington,,i can leave it with him and not worry about it! jump.gif jump.gif jump.gif
Geez and everyone give me chit about mine taking me two years so far.
 

73 Sanger Flat

Active member
EO will take care of it for you .. Call me if you can't find his place ..  Look for the  Grey Chevy extended cab truck .. South - East corner and it will be in the  building in the center of the complex

 

oldbuck40

Active member
ChryslerJet said:
oldbuck40 said:
Geeze! I looked back to page 1 and this little ordeal has taken me 5 yrs. crazy.gif well plus the mini jetboat in the middle of all this... Well the engine to the Youngblood is Leaving this afternoon headed to EO's in Arlington,,i can leave it with him and not worry about it! jump.gif jump.gif jump.gif
Geez and everyone give me chit about mine taking me two years so far.
Just cuz they can lol,,,hell if they didnt pick on ya you would think they didnt like ya! :grin:
 

ChryslerJet

New member
oldbuck40 said:
ChryslerJet said:
oldbuck40 said:
Geeze! I looked back to page 1 and this little ordeal has taken me 5 yrs. crazy.gif well plus the mini jetboat in the middle of all this... Well the engine to the Youngblood is Leaving this afternoon headed to EO's in Arlington,,i can leave it with him and not worry about it! jump.gif jump.gif jump.gif
Geez and everyone give me chit about mine taking me two years so far.
Just cuz they can lol,,,hell if they didnt pick on ya you would think they didnt like ya! :grin:
So what I am liked now?  jump.gif jump.gif jump.gif


I always know if you don't piss a few people off your not making a big enough impression.
 

oldbuck40

Active member
ChryslerJet said:
oldbuck40 said:
ChryslerJet said:
oldbuck40 said:
Geeze! I looked back to page 1 and this little ordeal has taken me 5 yrs. crazy.gif well plus the mini jetboat in the middle of all this... Well the engine to the Youngblood is Leaving this afternoon headed to EO's in Arlington,,i can leave it with him and not worry about it! jump.gif jump.gif jump.gif
Geez and everyone give me chit about mine taking me two years so far.
Just cuz they can lol,,,hell if they didnt pick on ya you would think they didnt like ya! :grin:
So what I am liked now?  jump.gif jump.gif jump.gif


I always know if you don't piss a few people off your not making a big enough impression.
i guess so! They aint kicked ya to the curb yet :smile30:
 

Disturbed

Active member
Devilman said:
I know nothing stays on track around here, but damn, ya'll get a room will ya... :cheesy:

How do you see it?  The two of them sitting in a room at Motel 6 eating Cheetos and watching the weather channel?
 

Patchman

Administrator
Staff member
Hell if Ol Buck can do it, maybe Esa can get his in the water again as well! That would be a spectacle right there! :grin:
 

Disturbed

Active member
Patchman said:
Hell if Ol Buck can do it, maybe Esa can get his in the water again as well! That would be a spectacle right there! :grin:

That would be nothing short of a miracle.  Next thing you know Greaser, with a Southwind and, Ghost Rider in a Cole, will each show up at the next get together.  Ain't gonna happen!  lol
 

Patchman

Administrator
Staff member
DISTURBED said:
Patchman said:
Hell if Ol Buck can do it, maybe Esa can get his in the water again as well! That would be a spectacle right there! :grin:

That would be nothing short of a miracle.  Next thing you know Greaser, with a Southwind and, Ghost Rider in a Cole, will each show up at the next get together.  Ain't gonna happen!  lol
Don't forget Pro53 in his Omega! Now I know that is a stretch! crazy.gif
 

oldbuck40

Active member
Ok so you know whats left to do,,, Motor, should be back home in a couple 2-3 wks. (Long Block)
gotta hang the mock up block with rail kit in the boat and drill the stringers.
measure for lightening thru hull headers,
after header instal need to mount steering cable,
hook up Hyd. diverter
JJ is going to rework my fuel tanks so the fill neck will fit the new holes we drilled in the hull,
install bilge pump,
Wire the entire boat,
and put the fender boards on the trailer!
 

73 Sanger Flat

Active member
Greg - Is it too bad to take down .020 to clean it up .. Bearing looks bad and I can see some marks on the crank .. Sound like you going to get a new crank .. Sorry about that , but EO will take care of you ..

Is your crank 4.25 ? I have my Callies we took out of mine , but we may use it in a different engine thsi winter .
 

Devilman

Well-known member
Don't forget that before you do any of that, you are gonna have to get all the dirt & flowers out of it that have been growing in it last few years.  :cheesy: This will be a good informative thread, not often someone takes a perfectly good planter box & makes a boat out of it. :grin:
 

oldbuck40

Active member
Brazos River Rat ( Billy ) said:
Greg - Is it too bad to take down .020 to clean it up .. Bearing looks bad and I can see some marks on the crank .. Sound like you going to get a new crank .. Sorry about that , but EO will take care of you ..

Is your crank 4.25 ? I have my Callies we took out of mine , but we may use it in a different engine thsi winter .
Yea its 4.25,,,talked to EO this morning,,he's getting parts coming this way! jump.gif
HE said looks like its gonna be bout 9.8 on comp. HEll that will make plenty of power for what i want!
 

oldbuck40

Active member
Devilman said:
Don't forget that before you do any of that, you are gonna have to get all the dirt & flowers out of it that have been growing in it last few years.  :cheesy: This will be a good informative thread, not often someone takes a perfectly good planter box & makes a boat out of it. :grin:
LOL i knew it wouldnt be long! :grin:
 

73 Sanger Flat

Active member
oldbuck40 said:
Brazos River Rat ( Billy ) said:
Greg - Is it too bad to take down .020 to clean it up .. Bearing looks bad and I can see some marks on the crank .. Sound like you going to get a new crank .. Sorry about that , but EO will take care of you ..

Is your crank 4.25 ? I have my Callies we took out of mine , but we may use it in a different engine thsi winter .
Yea its 4.25,,,talked to EO this morning,,he's getting parts coming this way! jump.gif
HE said looks like its gonna be bout 9.8 on comp. HEll that will make plenty of power for what i want!

9.8-10.0 compression will be good for a lake boat . It will sound good and still be a pump gas engine .. EO will get it done for you quick ..
 
Top