PRO53 HONDO FLATTY ?

pro53

Active member
The pills in it are 34's. The guy had two pumps, and I got my choice of the gas pump. It was setup for alcohol, but hes suppose to find the smaller pills were I can run gas. He ran it on a dragster about 2 years ago. Hes an old dragster dude. Still has a front engine one in the garage.I am also getting a moon tank. He has an Moon t tank that came out of his buddys hydro hanging on the wall with gas in it feeding his generator  :rolleyes: Hes says give me a 100 and give me another tank for the wall and its mine  :smile15: So gonna build a 9 x 20 x 9 tank for him monday and go pick me up a moon tank  :smile15: The tank has the moon flip cap, breather and brackets  :smile15:
 

pro53

Active member
Also when the times right will be taken the paint off and polishing and getting some new stacks, or repair the ones I got.Sine the dude I got them from has been running them for years, gonna be easier to tune when I need some help.After some elbow grease and some new tubes, or just repair mine should look like this  :grin:  All I know these things are cool  :smile15:

4836626925926-Vintage-Oldl-School-C.jpg
 

Devilman

Well-known member
So that setup you got has been painted? How easy will it be to strip all that off... The tops of the stacks I have seen different colors, anodized I guess?

The ones in that last pic there, the tops look plastic.
 

pro53

Active member
Devilman said:
So that setup you got has been painted? How easy will it be to strip all that off... The tops of the stacks I have seen different colors, anodized I guess?

The ones in that last pic there, the tops look plastic.
The dude had the tubes made off steel, the tops are gold anodized under the paint. He was running the injectors in 3 different places. I am on the search for new tubes as we speak  :grin:  When the times come, will just repair the tubes grind smooth, then get them chromed.
 

pro53

Active member
Man I love ebay, one a driveshaft for the v drive, 20= 22 for shipping  :smile15: Its alittle long still but it doesnt cost much to shorten it  :grin:
 

pro53

Active member
spd500 said:
Call Randy's Drive Shaft on McCarty , they will get you fixed up  :smile15:
Been useing Northwest drivetrains for years, they nes me by my first name when I was into 4 wheel drives  :grin:
Thanks though Shannon  :smile15:
 

duanehydro

Active member
pro53 said:
Man I love ebay, one a driveshaft for the v drive, 20= 22 for shipping  :smile15: Its alittle long still but it doesnt cost much to shorten it  :grin:

That's funny, I was bidding on his driveshaft pulley.....missed out at the last minute.....
 

Devilman

Well-known member
pro53 said:
Been useing Northwest drivetrains for years, they nes me by my first name when I was into 4 wheel drives  :grin:
Thanks though Shannon  :smile15:

Must mean they have a good memory, if they knew you by name after building only one driveshaft. I know you never tore anything up in that mall-crawler. :smile15:

:smile17: :smile13:

 

pro53

Active member
Damn cv joint angle  :smile14:  you run into that when you have more than 6" of inch lift  :grin:
 

pro53

Active member
Duanehydro said:
pro53 said:
Man I love ebay, one a driveshaft for the v drive, 20= 22 for shipping  :smile15: Its alittle long still but it doesnt cost much to shorten it  :grin:

That's funny, I was bidding on his driveshaft pulley.....missed out at the last minute.....
Man I bid 20 just to see what happend, WHAM  :rolleyes: Didnt need it yet, but might as well keep gathering parts. Hey Daune you have some seats for the Hydro yet?
 

Devilman

Well-known member
pro53 said:
Damn cv joint angle  :smile14:  you run into that when you have more than 6" of inch lift  :grin:

Uh-huh, suuuure, I don't think you can call those Autozone shackle kits a lift though George.  :cheesy: And don't be talking that CV joint noise, did you even have a front driveshaft  in that thing?  :grin: Thats what you run into when you run that kid stuff for a driveline, lol... :smile13:
 

pro53

Active member
Devilman said:
pro53 said:
Damn cv joint angle  :smile14:  you run into that when you have more than 6" of inch lift  :grin:

Uh-huh, suuuure, I don't think you can call those Autozone shackle kits a lift though George.  :cheesy: And don't be talking that CV joint noise, did you even have a front driveshaft  in that thing?  :grin: Thats what you run into when you run that kid stuff for a driveline, lol... :smile13:
It took you awhile to come up with that  :smile23: Always had a front drive shaft.t didnt turn it much  :smile23: Only a couple of times when it didnt have the mall crawlers on it and the boggers were on it  :smile15: Nothing like you though. I takes for ever to wash mud off. I was getting mud out a 4 months latter after my buddys pit.
 

pro53

Active member
Hey Duane, if you need some seats, I have these you could have but, you have to put one back together.White with blue stripes. Not going to use these in the Hondo, there just sitting there?

vdrive001.jpg
 

Devilman

Well-known member
pro53 said:
It took you awhile to come up with that  :smile23: Always had a front drive shaft.t didnt turn it much  :smile23: Only a couple of times when it didnt have the mall crawlers on it and the boggers were on it  :smile15: Nothing like you though. I takes for ever to wash mud off. I was getting mud out a 4 months latter after my buddys pit.

Busy today. :grin: Only a couple of times? You one of them "pinky out" off roaders? lol... I need to drag out some of those videos from our mudding days & let you check 'em out. Miss the ol' 4x4s.. :cool:
 

pro53

Active member
Mr.Magoo said:
i gave duane a set of seats for the hydro,they came out of the impact. :smile15: did you find some on ebay?
No, they are the one I got from Blownt.
 

duanehydro

Active member
pro53 said:
Hey Duane, if you need some seats, I have these you could have but, you have to put one back together.White with blue stripes. Not going to use these in the Hondo, there just sitting there?

vdrive001.jpg

Thanks for the offer, george! But I think the seats are handled.... :smile15:
 

Blender Man

New member
You are right. drivers seat as been made a couple of inches wider, next the other seat 4 inches wider...clean up and paint.... :smile13:
 
Top