PRO53 HONDO FLATTY ?
- Thread starter pro53
- Start date
IMPATIENT 1
New member
:smile23: my kids collected those for awhile :smile24: harrison stepp is who i'm talking about
NotImportant-1
New member
pro53 said:
How come for why did I know it would be running on the trailer :smile16:
NotImportant-1
New member
Does sound good though
on the trailer :smile13:
on the trailer :smile13:
pro53
Active member
Well another full 2 days. All new center braces, added a roller to the back for when I go into driveways.All new wheel studs and wheel bearings.Still have to cut out the bad section still in the picks where it was rusted. Finished off the trim around the fenders.Sitll have to put all new bushings in the springs.This was one rusted out trailer.
[attachment deleted by admin]
[attachment deleted by admin]
Blender Man
New member
looks like it was a little hard to weld that rusty metal, looking good... :smile22: :smile22:
pro53
Active member
Proably around 6 years :smile23: Hey hows it been going?Youre brother still racin, or just hangin in the pits?Gonna change the blue up alittle when I paint it, since I cant find any picks.Gonna be GRD 2 in the paint. I should of plenty of HP for in now :smile15:tfhcrew said:
Yeah it looks like you might have enough to get you started. John is still working with the TFH Nitro Chicken crew and also helping a few others out. He is working on a few other projects but is not locked in on a driver's position for this year. At least not yet. I think if BFF ever got off the ground he would be fighting with Tony Scarlata to see who got to drive it 1st! Never get a flat out of your blood.
When we were campaigning the twin screw flat, the red one that you showed airborne, we had bet Tony that we would beat him that year in the TAF championship. But Tony came back and bet us that we wouldn't even get into the 7's and boy did he put the gremlins on us with that one. Ran every race possible both in IHBA and SDBA and couldn't get her into the 7's. Then at Pheonix world finals John drove the living $h!^ out of the boat and ran a 7.93 I think. When he got to the outramp he told me that he almost had to crash the boat just to get under an 8. Not long afterwards Gene changed her back to a single screw and she laid some nice passes down for Andy Dement and I think Bill Dieaz(SP)? Tony is a helluva nice guy.
OK George, here is what I found this weekend:
This was “Scared Stiffâ€Â, later to become “Grounds for Divorceâ€Â. That is my little girl from 22 years ago.
This was John’s 2nd boat, a Sidescraft called “Religious Indecisionâ€Â.
This is a test & tune pass at Lake Conroe
This is me in my “chase boat†LOL
This was “Scared Stiffâ€Â, later to become “Grounds for Divorceâ€Â. That is my little girl from 22 years ago.
This was John’s 2nd boat, a Sidescraft called “Religious Indecisionâ€Â.
This is a test & tune pass at Lake Conroe
This is me in my “chase boat†LOL
pro53
Active member
Hey Jason that is awsome.GFD looks good in the pick. I am so stocked to get this boat done.I am planning on running those old MT valve covers with spacers under them.Did he ever run over the transome headers or the logs? I emailed Gary again today. Still no word from him.Thank you again for helping me find picks. All I need is one good pick of the boat. May not ever fiind but the picture of it in red is WAY COOL :smile15:tfhcrew said:OK George, here is what I found this weekend:
This was “Scared Stiffâ€Â, later to become “Grounds for Divorceâ€Â. That is my little girl from 22 years ago.
This was John’s 2nd boat, a Sidescraft called “Religious Indecisionâ€Â.
This is a test & tune pass at Lake Conroe
This is me in my “chase boat†LOL